Amaç: Bu çalışmada amaç, lamine cam plak yapılarının delaminasyon analizi için
matematiksel bir model geliştirmektir.
Materyal ve Yöntem: Bu çalışmada, lamine bir cam tabakada delaminasyon incelenmiştir.
Deformasyon ve gerilme denklemleri varyasyonel yaklaşım, minimum potansiyel enerji
teoremi ve sonlu elemanlar yöntemi ile elde edilir. Geliştirilen matematiksel modelde
kullanılan varsayımların doğrulanması için lamine cam levha bir sonlu eleman yazılımı
kullanılarak modellenmiştir.
Bulgular: Lamine cam, iki kat camın PVB (Polivinil butiral) veya farklı bir yapıştırıcı ile ısı
ve basınç yardımı ile birleştirilmesiyle oluşturulan bir cam türüdür. Herhangi bir darbe yükü
ile karşılaşıldığında etrafa yayılmaz ve örümcek ağı şeklinde çatlaklar oluşur. Bu çalışmanın
konusu, lamine cam levha yapıların delaminasyon analizidir. Delaminasyon, kompoziti
oluşturan katmanların ayrılması olarak tanımlanır. Kompozit katmanlar arasındaki düşük
mukavemet nedeniyle en yaygın hasar türüdür.
Sonuç: Malzeme sertliği kaybı ve malzeme ömrünün kısalması gibi sonuçlar verebildiği
için önemli bir çalışma konusudur.
Objective: The object of this study is to improve a mathematical model for delamination
analysis of laminated glass plate structures. In this study, delamination is investigated in a
laminated glass plate.
Material and Methods: Deformation and stress equations are obtained by the variational
approach, finite element method and minimum potential energy theorem. For the
verification of assumptions used in the developed mathematical model the laminated glass
plate is modeled using a finite element software.
Results: Laminated glass defined as a type of glass created by combining two layers of
glass with PVB (polyvinyl butyral) or a different adhesive with the help of heat and
pressure. When faced with any impact load, it does not spread around and cracks in the form
of spider webs occur. The subject of this study is delamination analysis of laminated glass
plate structures. Delamination is defined as the separation of the layers that make up the
composite. It is the most common type of damage due to low strength between composite
layers.
Conclusion: It is an important study subject because it can produce results such as loss of
material hardness and shortened material life.