Please use this identifier to cite or link to this item:
http://hdl.handle.net/11607/3212
Title: | Sıvama operasyonunun malzemenin mekanik ve mikroyapı özelliklerine etkisinin incelenmesi |
Other Titles: | Investigation of the effects of flow forming operation on mechanical and microstructural properties of materials |
Authors: | Böğrekci, İsmail Karagöz, Onur Adnan Menderes Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Anabilim Dalı |
Keywords: | Flow Forming Sheet Metal Spinning Tensile Test Microstructure Metal Sıvama Çekme Testi Mikroyapı Bağımsız-Et Kalınlığı Değişkenli Sıvama |
Issue Date: | 2017 |
Publisher: | Adnan Menderes Üniversitesi, Fen Bilimleri Enstitüsü |
Abstract: | Bu çalışmada, jant üretiminde yoğun olarak kullanılan ve kullanımı artarak devam eden sıvama operasyonunun tarihi, sıvama yöntemleri hakkında bilgiler verilmiştir. Sıvama yöntemlerinin kendi aralarındaki avantaj ve dezavantajlarından bahsedilmiştir. Bağımsız – et kalınlığı değişimli sıvama yöntemiyle üretilen kamyon kasnak jantlarının sıvama operasyonu öncesi ve sonrası malzeme özelliklerindeki değişim incelenmiştir. Mekanik özelliklerdeki bu değişimleri çekme testi ve sertlik testi uygulayarak gözlemlemeye çalışılmıştır. Ayrıca bu incelemeler, mikroyapı incelemeleri ile desteklenmeye çalışılmıştır. Sıvanarak ağırlık hafifletme amacıyla yapılan çalışmada, akma ve çekme mukavemetlerinde artış gözlenmiştir. In this study, information about the history of spinning operation and the methods of spinning are given which is used extensively in wheel production and which continues to increase in usage . The advantages and disadvantages of spinning methods are mentioned. The changes in the material properties before and after the forming operation of truck rims produced by flow-forming method were investigated. These changes in mechanical properties have been tried to observe by applying tensile test and hardness test. In addition, these studies have been tried to be supported by microstructure studies. In the work carried out for weight reduction by flow forming, an increasing at yield and tensile strengths was observed. |
URI: | http://hdl.handle.net/11607/3212 |
Appears in Collections: | Yüksek Lisans |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
ONUR KARAGÖZ - DP.pdf | Yüksek Lisans Tezi | 2.28 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.